It is not uncommon to omit some fundamentals when renovating or building your home! An essential warning device for everyone, the Wireless doorbell can then be one of the forgotten items during the electrical installation. How to take advantage of it, when you don’t want to work on the electrical installation? We opt for a wireless model! This one saves you long DIY sessions and can be installed in a few minutes. Forget the long cables, here it’s about waves. Explanations.
How does a wireless doorbell work?
A wireless doorbell is composed of a waterproof push button intended for outdoor use, and a chime, communicating together through radio frequencies. The push-button is usually battery-powered, but it can be solar-powered in some cases. The chime can work on the same principle, or be equipped with a rechargeable battery. Some models also plug directly into electrical outlets. Fully digital, this device is very popular for the configuration possibilities it offers: we note, for example, the possibility of installing a single chime, connected to different buttons (several inputs) and assigned to a different ring tone, depending on the room of the dwelling. More Read Avple
What are the advantages ?
Beyond its versatility, other advantages work in favor of this device which is cleverly distinguished from its analog predecessors.
- The wireless doorbell zmodo zh-cjaed does not, by definition, require any electrical connection,
- Its installation makes it possible to bypass all doubts about the electrical standards in force ,
- It is digital and therefore offers a choice of several pre-recorded melodies ,
- Its “silent” mode allows you not to be disturbed during the night,
- It is possible to replace the sound from the loudspeaker with a flash of light .
How to choose it well?
The products on the market compete in ingenuity to attract the greatest number. That said, the selection criteria generally remain similar between each kit. In addition to the autonomy and the type of power supply of the chime (batteries, plug, battery), the range remains one of the biggest variables when it comes to making a choice. Choose a rather long range if you live in a house and want to install your doorbell next to your electric gate! For information, the equipment generally offers spectra covering up to 30 or 50 meters in an open field, but others can reach a range of 200 meters!
How to install a wireless doorbell?
We knew you were going to crack! The good news, the wireless doorbell is much easier to install than its wired colleague, for which it is generally necessary to carry out grooves or a surface-mounting installation. Four steps are enough! Estimated time? A quarter of an hour, at most. We tell you everything.
1. Define the location of the button
Straightforward, make life easier for your visitors and place the door station of your device in the immediate vicinity of your entrance. This must be accessible both by car (house with exterior gate ) and for a visitor arriving in front of the front door of a small 20 m² studio. The recommended height is therefore between 1m20 and 1m50.
2. Fix the button
Once the location has been defined, insert the flat, AA, or AAA battery and secure the assembly using the screws and dowels supplied with the kit. To do this, you need a few tools, and:
- Mark a mark on the wall using a spirit level to level it,
- Position the base of the button (plate) on the line,
- Mark the drilling locations with crosses,
- Drill with a drill adapted to the nature of the wall,
- Sink the ankles,
- Screw the plate ,
- Clip the front of the button.
All you have to do is attach the small label with your name! To complete, also know that some kits are supplied with a very resistant adhesive strip; the latter allows the button to be fixed in an entrance, without having to drill. Rather practical in the building!
Read More: Businesspally hints long-tail keywords as SEO Opportunity
3. Set chime location
The advantage of radio wave operation is that you have some freedom as to where the modules are placed. It is customary to install the chime in the entrance, but it can find a completely different place in a dwelling! Finally, don’t forget that you can equip yourself with several horns. Do you live in a house with several floors? Is your office far from the entrance? Provide an alarm in these different rooms and adjust their volumes to your liking. Are you a musician working in a basement studio? Opt for a chime with an alert by light flashes. This will prevent the sound of your rehearsals from masking the speaker alert.
4. Pair the modules
Kits sold commercially are generally pre-paired. Factory programmed in the plug and play way, they must be able to work instantly! If this is not the case, consult the instructions for your kit to interface the button and the chime.
More Read Tech Bable
