When your plumbing breaks down, you don’t realize how much you rely on it. You’re bound to run into some plumbing issues as your home ages, whether it’s a dripping faucet here or a slow drain there. Some of these puzzles are simple enough for you to do on your own. Others are potentially dangerous and should only be handled by trained professionals. Knowing the most common plumbing issues and how to fix them will help you decide whether to use your tool belt or hire a plumbing repair company in Cypress.
Clogged Toilets and Drains
Water will back up when you empty a sink or take a shower, indicating a clogged drain. Clogged toilets usually show more obvious signs. A toilet bowl overflows if water backs up instead of flushing regularly. By clearing the obstruction yourself or by hiring a plumber in Cypress, you can usually get your drains and toilets back to normal.
What causes them – Hair is a common cause, but other objects such as a shampoo lid or a tiny toy can also clog the drain. It becomes a problem when something other than dissolvable waste enters the toilet and is flushed. Because such solid objects can’t move through the pipe, they stay put, making it difficult or impossible for water to flow past the blockage and down the pipes.
How to fix – Plungers can be used in toilets and drains. The simple plumbing equipment uses air pressure to loosen obstructions. To create suction, place the plunger’s open end entirely over the drain and move it up and down. If you can get near enough to the obstruction, grab it with tweezers or pliers and pull it out of the drain. If you can’t clear the obstruction with a plunger, chemical drain cleaners are a choice.
Faucet and Pipe Leakages
Leaking faucets and pipes are a typical plumbing issue in homes and apartments. Dripping faucets are more of a bother and a waste of money than a plumbing emergency, but they add up quickly — correcting leaks in your home could save you up to 10% on your water bill.
What is the cause – A leaky faucet is usually caused by a broken washer that forms the tap’s seal. Damage can include tearing, dislodging, and stiffening. As a result of the damage, the washer no longer seals tightly, allowing small amounts of water to flow from the faucet. Over time, the valve seat may wear or corrode. You are more likely to have a leak at a joint in your pipes. Deterioration, movement, high water pressure, and other factors may cause leaks.
How to fix – Plumber Cypress can be the best choice since this is not an easy DIY project. There are many ways to deal with leaking pipes. It’s sometimes easier to entrust the task to a professional to avoid a major disaster, even if you only need to replace a basic joint.
Low Pressure Water
Low water pressure is a frequent plumbing issue in older homes, but it can also affect newer homes. Low water pressure might emerge quickly or steadily worsen over time, depending on the source. Because low water pressure makes it difficult to rinse dishes and shower for whatever reason, resolving the issue is a top priority if you want to restore normal water usage.
What is the cause – Turn off all faucets, check your water metre, and wait a few hours without using any water to check for leaks? If the water metre changes, you almost certainly have a leak. Another likely cause is mineral and sediment accumulation in the pipes, as well as in the faucet aerators and showerheads. As a result of the build-up, the water flow is impeded, resulting in low pressure.
How to fix – Soaking the aerator in vinegar for over a night can help loosen the build-up. If you are unable to remove the showerhead, put vinegar in a plastic bag.
By wrapping the bag around the faucet, place the aerator or showerhead in the solution. To restore water pressure, other issues demand the expertise of a plumber.
Putting It All Together
The issues listed above are some of the most frequent plumbing issues that Plumber Cypress can handle. The Plumbing professionals provide cost-effective solutions based on their years of experience and competence.
